Avenger V6-2.7L Flex Fuel (2009)
1. Remove seat belt anchor bolt.See: Restraint Systems/Seat Belt Systems/Seat Belt Retractor/Service and Repair/Seat Belt Retractor - Removal
2. Using trim stick C-4755, pry the rear of panel forward disengaging clip (3).
3. Using a flat blade screwdriver or equivalent, push down on tab (2) disengaging tab. Slide tether out of tether housing (1).
4. Route seat belt through opening and remove C-pillar trim panel from vehicle.
C-Pillar Trim Panel-Installation
INSTALLATION
1. Place upper C-pillar trim (1) into position.
