Avenger V6-27L Flex Fuel (2009): Remote Start Antenna Removal
Keyless Start Antenna: Service and Repair
Remote Start Antenna - Removal
REMOVAL
WARNING: Wait two minutes for the system reserve capacitor to discharge before servicing any airbag components. Failure to do this may
result in serious or fatal injury.
The remote start antenna is located driver's side front of dash.
1. Disconnect and isolate the battery negative cable.
2. Remove radio. Refer to See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Radio/Stereo/Service and Repair/Removal
and Replacement/Radio - Removal.
3. Remove instrument cluster. Refer to See: Instrument Panel, Gauges and Warning Indicators/Instrument Cluster / Carrier/Service and
Repair/Instrument Cluster - Removal.
4. Remove the instrument panel top pad. Refer to See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel
Pad - Removal.
NOTE: During removal of the remote start antenna note the routing location of the coaxial cable.
5. Disconnect remote start antenna coaxial cable connector (1) from skreem module (3).
6. Remove the mounting clip (2).
7. Remove the mounting clip at the steering column reinforcement bracket.
8. Remove screws (1) and remove remote start antenna (2) from instrument panel assembly.