Avenger V6-2.7L Flex Fuel (2009)
7. Install the headrest sleeves ensuring proper alignment.
8. Install the black foam under the seat back cover.
9. Engage the J-hooks securing the seat back cover to the frame.
10. Install the two lower push-pins securing the seat back cover.
11. Remove the spring retainers from the seat back frame and install to the seat back cover panel.
12. Install the seat back cover panel ensuring the retainers engage.
13. Install the seat back to the seat frame. See: Seat Back/Service and Repair/Seats, Front Sedan/Front Seat Back Recliner - Removal
14. Install the seat to vehicle.See: Service and Repair/Seat - Removal.
15. Install the headrest to the seat.
16. Connect the battery negative cable.
Rear
INSTALLATION