Avenger V6-2.7L Flex Fuel (2009)
3. Remove the disc brake caliper (2) lower guide pin bolt (1).
CAUTION: When moving rear brake caliper upward, use extreme care not to damage or overextend the flex hose. Damage may occur.
4. Rotate the caliper (1) upward hinging off the upper guide pin bolt. Rotate the caliper upward just enough to allow brake pad removal. Hang the
caliper assembly in this position using wire or a bungee cord.
5. Remove the inboard brake pad (5) from the caliper adapter bracket (3).
6. Remove the outboard brake pad (2) from the caliper (1) by prying the brake pad retaining clip over the raised area on the caliper. Slide the brake
pad off of the brake caliper.