Avenger V6-2.7L Flex Fuel (2009)
13. Install standard wheel mounting nuts, flat side to rotor, on all the wheel studs (2). Progressively tighten the nuts in a crisscross pattern to 135 Nm
(100 ft. lbs.).
14. Mount the Dial Indicator (1), Special Tool C-3339A, and remeasure runout on both sides of the brake rotor as explained in earlier steps to see if
runout is now within specifications. See: Specifications
15. If runout is still not within specifications, reface or replace brake rotor. See: Service and Repair/Procedures
