Avenger V6-2.7L Flex Fuel (2009)
Parking Brake Shoe: Service and Repair
Removal
REMOVAL
NOTE: Before proceeding, See: Service Precautions/Technician Safety Information See: Service Precautions/Vehicle Damage Warnings .
1. Raise and support the vehicle. See: Maintenance
NOTE: If removing parking brake shoes on both sides of vehicle, perform remaining steps on each side of the vehicle.
2. Access and remove the rear brake rotor (3). See: Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and Replacement/Brake Rotor
- Removal
3. Turn the brake shoe adjuster wheel until the adjuster is at shortest length.
4. Remove the upper return spring (1) from the anchor pin (3) and the rear brake shoe.
5. Remove the upper return spring (2) from the anchor pin (3) and the front brake shoe.