Avenger V6-2.7L Flex Fuel (2009)
Inspect and replace the water pump if it has any of the following defects:
1. Damage or cracks on the pump body.
2. Coolant leaks: If the shaft seal is leaking, this will be evident by traces of thick deposits of dried glycol running down from the pump primary weep
passage. A thin black stain below the pump primary weep hole/passage is considered normal operation.
3. Coolant leaks: If the pump primary weep passage is plugged, coolant may come from the secondary weep passage and collect in the valley of the
engine. The coolant will eventually run out the back side of the engine. Leakage from the secondary weep passage may give false indications that
core plug(s) may be leaking on the back side of the engine block. If this condition is found, clean the primary weep passage of debris.
4. Impeller rubs inside of cylinder block.
5. Excessively loose or rough turning bearing.
