Avenger V6-2.7L Flex Fuel (2009)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Vibration Damper - Installation
INSTALLATION
1. Install damper using Special Tools 8179 (3) Screw, with Nut and Thrust Bearing from 6792, and 6792-1 Installer (2).
2. Install damper center bolt. Tighten center bolt to 170 Nm (125 ft. lbs.).
3. Install accessory drive belts See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Removal and
Replacement/Serpentine Accessory Drive Belt - Installation.
4. Install belt splash shield and right front wheel.
5. Lower vehicle.
6. Connect negative battery cable.
