Avenger V6-2.7L Flex Fuel (2009)
1. Coat valve stems with clean engine oil and insert them in cylinder head.
2. If valves or seats have been reground, check valve tip height (A). If valve tip height for intake valve is greater than 47.59 mm (1.8737 in.) or 49.14
mm (1.9347 in.) for exhaust valve, grind valve tip until within specifications. Make sure measurement is taken from cylinder head surface to the
top of valve stem.
3. Install valve spring (4). See: Valve Spring/Service and Repair/Removal and Replacement/Valve Springs - Installation
