Avenger V6-2.7L Flex Fuel (2009)
7. Remove camshafts and rocker arms See: Camshaft, Lifters and Push Rods/Camshaft/Service and Repair/Removal and Replacement/Camshaft -
Removal.
8. With air hose attached to spark plug adapter installed in the cylinder being serviced, apply 620.5-689 kPa (90-100 psi) air pressure. This is to hold
valves in place while servicing components.
9. Using Special Tool MD 998772A with adapter 6779, compress valve spring and remove valve locks, retainer, and valve spring.
10. Remove valve stem seal See: Seals and Gaskets/Valve Guide Seal/Service and Repair/Valve Guide Seals - Removal.
Off Vehicle
OFF VEHICLE
1. With cylinder head removed, compress valve springs using a Special Tool C-3422-D, Valve Spring Compressor.
2. Remove valve retaining locks, valve spring retainers, valve springs and valve spring seat/stem seal assembly.
