Avenger V6-2.7L Flex Fuel (2009)
9. Install the air cleaner housing assembly and connect the throttle body air inlet hose (2) See: Tune-up and Engine Performance Checks/Air Cleaner
Housing/Service and Repair/Air Cleaner Body - Installation.
10. Connect the negative battery cable and tighten nut to 5 Nm (45 in. lbs.).
Intake Manifold Lower
LOWER
1. Clean and inspect sealing surfaces of cylinder head and manifold. Gaskets can be reused provided they are free of cuts or tears.
2. Position manifold on cylinder head surfaces.
NOTE: For ease of installing upper intake manifold, install a bolt 2 - 3 turns to the rearmost attaching hole of intake. This will properly
position lower manifold.
3. Install manifold attaching bolts and tighten in sequence shown, to 12 Nm (105 in. lbs.). Remove bolt used for aligning manifold.