Avenger V6-2.7L Flex Fuel (2009)
6. Lower the primary chain with the left side sprocket through the left cylinder head opening.
NOTE: The camshaft sprockets can be allowed to float on the camshaft hub during installation.
7. Loosely position the left side camshaft sprocket over the camshaft hub.
8. Align the timing (plated) link to the crankshaft sprocket timing mark (3).
9. Position the primary chain onto the water pump drive sprocket (11).
10. Align the right camshaft sprocket timing mark to the timing (plated) link on the timing chain (8) and loosely position over the camshaft hub.
11. Verify that all chain timing (plated) links are properly aligned to the timing marks on all sprockets.
12. Install the left side lower chain guide (2) and tensioner arm (5). Tighten attaching bolts to 28 Nm (250 in. lbs.).
NOTE: Inspect the O-ring on the chain guide access plugs before installing. Replace the O-ring as necessary.
13. Install the chain guide access plugs to the cylinder heads. Tighten plugs to 20 Nm (15 ft. lbs.).
