Avenger V6-2.7L Flex Fuel (2009)
16. Install the reset chain tensioner (1) into the right cylinder head.
17. Position tensioner retaining plate (2) and tighten bolts (3) to 12 Nm (105 in. lbs.).
18. Starting at the right cylinder bank, first position the camshaft damper (1) (if equipped) on the camshaft hub, then insert a 3/8" square drive
extension with a breaker bar into the intake camshaft drive hub. Rotate the camshaft until the camshaft hub aligns to the camshaft sprocket and
damper attaching holes. Install the sprocket attaching bolts and tighten to 28 Nm (250 in. lbs.).
19. Insert a 3/8" square drive extension with a breaker bar into the intake camshaft drive hub and rotate the camshaft until the sprocket attaching bolts
can be installed. Tighten the sprocket bolts to 28 Nm (250 in. lbs.).
20. Rotate the crankshaft slightly clockwise to remove timing chain slack, if necessary.
21. Activate the timing chain tensioner by using a flat bladed pry tool to gently pry tensioner arm towards the tensioner slightly. Then release the
