Avenger V6-2.7L Flex Fuel (2009)
Timing Cover: Service and Repair
Engine Timing Cover(s) - Installation
INSTALLATION
1. Inspect and clean timing chain cover sealing surfaces.
2. Before installing timing cover gasket apply a 1/8 inch bead of Mopar(R) Engine RTV GEN II to the parting lines (1) between the oil pan and
cylinder block.
3. Install timing cover (2) and gasket (1). Tighten M10 cover bolts to 54 Nm (40 ft. lbs.) and M6 bolts to 12 Nm (105 in. lbs.).
4. Install front crankshaft oil seal using Special Tool 6780-2 sleeve and 6780-1 installer.
5. Install right engine mount See: Drive Belts, Mounts, Brackets and Accessories/Engine Mount/Service and Repair/Engine Mount Insulator -
Installation.
6. Install screws attaching heater supply tube to right front frame rail area.