Avenger V6-2.7L Flex Fuel (2009)
and Repair/Instrument Panel - Removal.
2. Remove the left and right instrument panel air outlets See: Air Register/Service and Repair/Air Outlet - Removal.
3. Remove the outer instrument panel ducts See: Instrument Panel Duct - Removal.
4. Remove the instrument panel top pad See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument
Panel Pad - Removal.
5. Remove the two screws (1) that secure the driver side demister duct (2) to the instrument panel top cover (3).
6. Disconnect the driver side demister duct from the defroster duct (4) and remove the demister duct.
PASSENGER SIDE
1. Remove the instrument panel and place it on a workbench See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service
and Repair/Instrument Panel - Removal.
2. Remove the left and right instrument panel air outlets See: Air Register/Service and Repair/Air Outlet - Removal.
3. Remove the outer instrument panel ducts See: Instrument Panel Duct - Removal.
4. Remove the instrument panel top pad See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument
Panel Pad - Removal.
5. Remove the three screws (4) that secure the passenger side demister duct (1) to the instrument panel top cover (2).
6. Disconnect the passenger side demister duct from the defroster duct (3) and remove the demister duct.
Instrument Panel Demister Duct - Installation
INSTALLATION
NOTE: LHD Chrysler model shown in illustrations. Dodge and RHD models similar.
DRIVER SIDE
1. Position the driver side demister duct (2) to the instrument panel top cover (3) and connect it to the defroster duct (4). Make sure the ducts are
fully engaged to each other.
2. Install the two screws (1) that secure the driver side demister duct (2) to the instrument panel top cover (3). Tighten the screws to 2.2 Nm (20 in.
lbs.).
