Avenger V6-2.7L Flex Fuel (2009)
NOTE: Illustration shown with front fascia removed for clarity.
12. Raise and support the vehicle.
NOTE: On gasoline engine equipped models, reach up through the opening in the bottom of the front fascia located in the right front corner
of the vehicle to gain access to the A/C liquid line.
13. Remove the nut (3) that secures the A/C liquid line (2) to the right side of the A/C condenser (1).
14. Disconnect the A/C liquid line from the A/C condenser and remove and discard the O-ring seal and gasket.
15. Install plugs in, or tape over the opened liquid line fitting and the condenser outlet port.
NOTE: Illustration shown with front fascia removed for clarity.
16. Remove the two bolts (3) that secure the lower condenser brackets to the radiator (5).
17. Lower the vehicle.
18. If equipped, disconnect the automatic transmission cooler lines (2) from the left side of the A/C condenser (1) See: Engine, Cooling and
Exhaust/Cooling System/Service and Repair.
19. Carefully lift the A/C condenser straight up and disengage the two upper condenser brackets (4) from the radiator and remove the condenser from
the engine compartment.
