Avenger V6-2.7L Flex Fuel (2009)
Evaporator Drain Tube: Service and Repair
Condensation Drain Tube - Removal
REMOVAL
1. Pull back the floor carpet to gain access to the condensation drain tube (2) located on the left side of the vehicle at the front right of the foot well
See: Body and Frame/Interior Moulding / Trim/Carpet/Service and Repair/Carpet - Removal.
2. Disconnect the condensation drain tube from the bottom of the HVAC housing (1).
3. Remove the condensate drain tube from the rubber grommet (3) in the front floor panel (4).
4. If required, remove the rubber grommet from the floor panel.
