Avenger V6-2.7L Flex Fuel (2009)
4. Install the air inlet housing (3) onto the HVAC housing (1) See: Removal and Replacement/HVAC Housing - Installation.
5. Install the HVAC housing assembly See: Removal and Replacement/HVAC Housing - Installation.
HVAC Housing
HOUSING-HVAC
NOTE: LHD model shown in illustrations. RHD model similar.
1. If removed, install the seal (4) onto the evaporator tube tapping block (5).
NOTE: Make sure that the foam insulator is properly positioned in the HVAC housing.
2. Carefully install the A/C evaporator (1) and foam insulator (2) into the lower half of the HVAC housing (3).