Avenger V6-2.7L Flex Fuel (2009)
Wheel Cover: Service and Repair
Wheel Cover - Removal
REMOVAL
1. Raise and support the vehicle so that tire and wheel assembly clears ground level. See:
CAUTION: When removing the bolt-on wheel cover, do not attempt to pry the wheel cover off the wheel. It is held on by the wheel mounting
nuts.
2. Remove the five wheel mounting (lug) nuts (3) from the wheel studs. While removing the nuts, hold the wheel cover (2) in place so it doesn't fall
off when the last nut is removed.
3. Remove the wheel cover (2) using care not to let the tire and wheel assembly (1) fall off the vehicle.