Avenger V6-2.7L Flex Fuel (2009)
Engine Control Module: Description and Operation
Powertrain Control Module - Operation
OPERATION
The PCM supplies two regulated 5 volts supplies - a 5V primary and a 5V secondary (auxiliary) to the following sensors:
-
Camshaft Position Sensor (5V secondary)
-
Crankshaft Position Sensor (5V primary)
-
EGR Position feedback sensor (5V secondary) (if equipped)
-
Engine coolant temperature sensor (connected to 5V internal via a pullup resistor)
-
Inlet Air Temperature Sensor (connected to 5V internal via a pullup resistor)
-
Knock sensor (connected to 5V internal via a pullup resistor)
-
Manifold absolute pressure sensor (5V secondary)
-
Oil Pressure Switch (connected to 5V internal via pullup resistor)
-
Pedal Value Sensor #1 (5V Primary)
-
Pedal Value Sensor #2 (5V Secondary)
-
SRV Position Feedback Sensor (5V Secondary)
-
Throttle Position Sensors (5V Primary)
-
Variable Line Pressure Sensor (5V Secondary)