Avenger V6-2.7L Flex Fuel (2009)
Engine Control Module: Removal and Replacement
Engine Control Module - Removal
REMOVAL
1. Remove air inlet duct (3).
2. Disconnect negative battery cable.
3. Disconnect vacuum hose (1).
4. Remove air filter housing assembly (2)See: Fuel Delivery and Air Induction/Air Cleaner Housing/Service and Repair/Air Cleaner Body - Removal
.
5. Disconnect both ECM (1) electrical connectors.
6. Remove ECM bracket retaining bolts (2) and remove ECM (3).
Engine Control Module - Installation
INSTALLATION