Avenger V6-2.7L Flex Fuel (2009)
Condenser: Service and Repair
Ignition Capacitor - Removal
Ignition Capacitor 1st
2.7L 1st
IGNITION COIL CAPACITOR 2.7L
1. Disconnect and isolate the negative battery cable.
2. Disconnect the electrical connector.
3. Remove nut and capacitor.
Ignition Capacitor 2nd
2.7L 2nd
The ignition capacitor is located under the intake manifold on the drivers side of the engine.
1. Disconnect and isolate negative battery cable at battery.
2. Remove electrical connector (3).
3. Remove mounting bolt (1) and ignition capacitor (2).