Avenger V6-2.7L Flex Fuel (2009)
1. Install ECM (3) on mounting bracket. Torque fastener to 10.7 Nm (95 lbs. in.).
2. Connect both ECM electrical connectors (1).
3. Install air filter housing assembly (2)See: Fuel Delivery and Air Induction/Air Cleaner Housing/Service and Repair/Air Cleaner Body - Installation
.
4. Connect vacuum hose (1).
5. Connect negative battery cable.
6. Install air inlet tube (3).
7. Reprogram ECM. See: Computers and Control Systems/Testing and Inspection/Programming and Relearning.
Powertrain Control Module - Removal
2.7 3.5L (NGC)
