Avenger V6-2.7L Flex Fuel (2009)
Fuel Pressure Release: Service and Repair
FUEL SYSTEM PRESSURE RELEASE PROCEDURE
WARNING: The fuel system is under constant pressure even with engine off. Until the fuel pressure has been properly relieved from the
system, do not attempt to open the fuel system. Do not smoke or use open flames/sparks when servicing the fuel system. Wear
protective clothing and eye protection. Make sure the area in which the vehicle is being serviced is in a well ventilated area.
A separate fuel pump relay is no longer used. A circuit within the Totally Integrated Power Module (TIPM) is used to control the electric fuel
pump located within the fuel pump module.
1. Remove fuel fill cap.
2. Remove lower rear seat cushion.
3. Remove the fuel pump module cover (1).