Avenger V6-2.7L Flex Fuel (2009)
Initialize EGS
From the "Home" screen, select "ECU View"
-
Select "PCM/ECM"
-
Select "Misc. Functions"
-
Select "Initialize EGS" and follow the on screen instructions.
-
When complete, select "Finish"
Injector Quantity Adjustment
From the "Home" screen, select "ECU View"
-
Select "PCM/ECM"
-
Select "Misc. Functions"
-
Select "Injector Quantity Adjustment" and follow the on screen instructions.
-
When complete, select "Finish"
Mobile DeSoot - NO Minimum Required Soot Load
From the "Home" screen, select "ECU View"
-
Select "PCM/ECM"
-
Select "Misc. Functions"
-
Select "Mobile DeSoot - NO Minimum Required Soot Load" and follow the on screen instructions.
-
When complete, select "Finish"
NOx Catalyst (New) Initialization
From the "Home" screen, select "ECU View"
-
Select "PCM/ECM"
-
Select "Misc. Functions"
-
Select "NOx Catalyst (New) Initialization" and follow the on screen instructions.
-
When complete, select "Finish"
PCM/ECM Replaced
The vehicle pin (Personal Identification Number) will be required to complete the routine. This information may be obtained in three ways:
1. The original selling invoice
2. DealerCONNECT > Parts > Key Codes
3. Contacting the District Manager.
From the "Home" screen, select "ECU View"
-
Select "WIN"
-
Select "Misc. Functions"
-
Select "PCM/ECM Replaced" and follow the on screen instructions.
-
When complete, select "Finish"
Program Variant Code
From the "Home" screen, select "ECU View"
-
Select "PCM/ECM"
-
Select "Misc. Functions"
-
Select "Program Variant Code" and follow the on screen instructions.
-
When complete, select "Finish"
Quicklearn
From the "Home" screen, select "ECU View"
-
Select "PCM/ECM"