Avenger V6-2.7L Flex Fuel (2009)
INSTALLATION
1. Place PAB into top pad and engage one side of the PAB hooks into their retaining windows (3).
2. Push the PAB down into the top pad (1) making sure to engage the hooks into the loops or tabs (2).
3. Install the instrument panel top pad See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument
Panel Pad - Installation.
4. Install the two fasteners (2) retaining PAB to instrument panel assembly inside glove box opening. Tighten to 9.5 Nm (84 in. lbs.).
5. Connect the two PAB squib connectors (1).
6. Install the glove box See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair/Instrument Panel Glove Box -
Installation.
