Avenger V6-2.7L Flex Fuel (2009)
WARNING: Wait two minutes for the system reserve capacitor to discharge before servicing any airbag components. Failure to do this may
result in serious or fatal injury.
3. Remove the driver airbag See: Driver Air Bag - Removal.
4. With driver airbag removed, pick a corner and push down on the inflator or latch hook mounting plate (1) until the latch hooks (2) push out of the
driver airbag cover (3).
5. Starting at a point on the airbag, work your way around the airbag until all the hooks have been released.
6. Remove driver airbag trim cover from driver airbag.
Driver Air Bag Cover - Installation
COVER
1. Place driver airbag into new driver airbag cover.
WARNING: Be careful not to pinch airbag cushion between latch hook mounting plate and cover.
2. Push down on the latch hook mounting plate (1) and guide the latch hooks (2) into the slots on the driver airbag cover (3).
