Avenger V6-2.7L Flex Fuel (2009)
Seat Belt Buckle: Service and Repair
Seat Belt Buckle - Installation
Front
FRONT
1. Position the buckle (1) on the seat cushion frame (2).
2. Install the retaining bolt and tighten to 100 Nm (74 ft. lbs.).
3. Install the cushion side shield See: Body and Frame/Seats/Seat Cushion/Service and Repair/Seat Cushion Side Shields - Installation.
4. Install the front seat See: Body and Frame/Seats/Service and Repair/Seat - Installation.
Rear
REAR
NOTE: On left side buckle, make sure you have the center seat belt webbing (3) anchor underneath the buckle before you install and tighten
nut.
1. Place buckle (1 or 4) on stud and install nut (2). Tighten nut to 101 Nm (74.5 ft. lbs.).
2. Install rear seat cushion See: Body and Frame/Seats/Seat Cover/Service and Repair/Seat Cushion Cover - Installation.