Avenger V6-2.7L Flex Fuel (2009)
Seat Belt Height Adjuster: Service and Repair
Seat Belt Turning Loop Adjuster - Installation
INSTALLATION
1. Place seat belt height adjuster (4) into position.
2. Slide the lower hook (2) down into the B-pillar opening (1).
3. Install bolt (3) attaching height adjuster (4) to B-pillar. Tighten bolt to 59 Nm (43.5 ft. lbs.).
4. Install the bolt (3) attaching the turning loop (2) to the height adjuster (1). Tighten bolt to 34 Nm (25 ft. lbs.).
5. Install B-pillar trim panel (4) See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/B-Pillar Trim
Panel-Installation.