Avenger V6-2.7L Flex Fuel (2009)
Hazard Warning Switch: Description and Operation
Hazard Warning Switch - Description
DESCRIPTION
The hazard switch is located in the Accessory Switch Bank Module (ASBM) (3) just below the radio (1), and above the heater air conditioning controls
(2) in the instrument panel center stack. This switch is the control for the hazard warning lighting. The only visible component of the switch is the control
push button that is located in the center of the ASBM. The hazard switch cannot be adjusted or repaired. If the switch is ineffective or damaged, the
entire ASBM must be replaced See: Sensors and Switches - Accessories and Optional Equipment/Integrated Accessory Switch Assembly/Service and
Repair/Instrument Cluster Switch Pod - Removal.
