Avenger V6-2.7L Flex Fuel (2009)
Battery Cable: Service and Repair
Battery Cables - Removal
REMOVAL
BATTERY HARNESS
WARNING:
To protect the hands from battery acid, a suitable pair of heavy duty rubber gloves should be worn when removing or servicing a
battery. Safety glasses also should be worn.
WARNING: Remove metallic jewelry to avoid injury by accidental arcing of battery current.
CAUTION: The negative battery cable remote terminal (2) must be disconnected and isolated from the remote battery post (1) prior to service
of the vehicle electrical systems. The negative battery cable remote terminal can be isolated by using the supplied isolation hole (3)
in the terminal casing.
NOTE: Diesel battery shown, gasoline battery similar.
1. Disconnect and isolate the negative battery cable remote terminal from the remote battery post.
2. Raise vehicle on hoist, See: Maintenance.
3. Remove the battery and set aside, See: Service and Repair/Removal and Replacement/Battery - Removal.
4. On diesel engine equipped vehicles, disconnect the in-line connector to the instrument panel harness (2)
