Avenger V6-2.7L Flex Fuel (2009)
5. Install the remote positive battery terminal (2) onto the mounting bracket on the left strut tower (15) by pushing straight down until fully engaged.
6. Remove the cover (1) from the remote positive battery terminal (2). Position the starter harness positive cable (3) onto the remote positive battery
post. Install the retaining nut (4) and tighten to 16.5 Nm (145 in. lbs.) Install the cover (1) onto the remote positive battery terminal (2).
7. Raise vehicle on hoist, See: Maintenance.
8. On diesel engine equipped vehicles, connect the in-line connector to the instrument panel harness (2).
9. Install the battery, See: Service and Repair/Removal and Replacement/Battery - Installation.
10. Lower the vehicle.
11. Position the negative battery harness cable remote terminal (4) onto the remote battery post (1). Install the nut (5) and tighten to 16.5 Nm (145 in.
lbs.)
STARTER HARNESS
WARNING:
To protect the hands from battery acid, a suitable pair of heavy duty rubber gloves should be worn when removing or servicing a
battery. Safety glasses also should be worn.
WARNING: Remove metallic jewelry to avoid injury by accidental arcing of battery current.
