Avenger V6-2.7L Flex Fuel (2009)
Battery Tray: Service and Repair
Battery Tray - Installation
INSTALLATION
WARNING:
To protect the hands from battery acid, a suitable pair of heavy duty rubber gloves should be worn when removing or servicing a
battery. Safety glasses also should be worn.
WARNING: Remove metallic jewelry to avoid injury by accidental arcing of battery current.
CAUTION: The negative battery cable remote terminal (2) must be disconnected and isolated from the remote battery post (1) prior to service
of the vehicle electrical systems. The negative battery cable remote terminal can be isolated by using the supplied isolation hole (3)
in the terminal casing.
1. Position the battery tray (3) onto the left front frame rail (1).
2. Install the bolts (2) securing the battery tray (3) to the frame rail (1).Tighten the bolts to 16 Nm (142 in. lbs.)
3. Install the battery See: Service and Repair/Removal and Replacement/Battery - Installation.
4. Install the negative battery cable remote terminal onto the remote battery post. Tighten the nut to 16.5 Nm (145 in. lbs.)