Avenger V6-2.7L Flex Fuel (2009)
16. Remove the pressure hose (2) at the pump (1).
17. Remove the pump mounting bracket bolt (1) near the pump pulley.
18. Remove the pump mounting bracket bolts (2) behind the pump on the back of the engine.
19. Remove the pump with mounting bracket from the engine. To remove the pump from the engine compartment, rotate the pump so that the pulley is
toward the engine, then remove the pump through the opening made by removing the axle half shaft in an earlier step.
20. Remove the three pump mounting bolts through the pulley openings.
21. Remove the power steering pump from the mounting bracket.