Removal of Front Steering Knuckle - Avenger V6-27L Flex Fuel (2009)
NOTE: Do not allow the half shaft (1) to hang by the inner C/V joint; it must be supported to keep the joint from separating during this
operation.
14. Pull the knuckle (2) off the half shaft (1) outer C/V joint splines and remove the knuckle from the vehicle.
15. If required, remove the three screws (2) fastening the shield (3) to the knuckle (1). Remove the shield.
16. If required, remove the four bolts (2) fastening the hub and bearing (1) to the knuckle (3).
17. If required, slide the hub and bearing (1) out of the knuckle.