Avenger V6-2.7L Flex Fuel (2009)
13. Remove retainers (1and 2).
Springs and Valves Location
14. Remove valves and springs.
Valve Body - Assembly
ASSEMBLY
NOTE: Cleanliness through entire disassembly and assembly of the valve body cannot be overemphasized. When disassembling, each part
should be washed in a suitable solvent, then dried by compressed air. Do not wipe parts with shop towels. All mating surfaces in the
valve body are accurately machined; therefore, careful handling of all parts must be exercised to avoid nicks or burrs.
NOTE: If valve body assembly is reconditioned, the PCM/TCM Quick Learn Procedure must be performed See: Powertrain
Management/Computers and Control Systems/Testing and Inspection/Programming and Relearning/Powertrain Control Module -
Programming/Quick Learn Procedure .