Avenger V6-2.7L Flex Fuel (2009)
Windshield Washer Reservoir: Service and Repair
Windshield Washer Reservoir - Removal
REMOVAL
1. Disconnect and isolate the battery negative remote cable.
2. Disconnect washer fluid hose at in-line connector on top of the right shock tower.
3. Partially remove bumper fascia as needed to gain access to the reservoir See: Body and Frame/Bumper/Front Bumper/Front Bumper Cover /
Fascia/Service and Repair/Front Bumper Fascia - Removal.
4. Disconnect wire connector from washer pump and harness mounting tab.
5. Remove washer reservoir mounting bolts (2).
6. Drop reservoir (3) down and away from vehicle.
7. Drain washer fluid from reservoir (3) into an appropriate container.
