Avenger V6-2.7L Flex Fuel (2009)
Windshield Washer Reservoir: Service and Repair
Windshield Washer Reservoir - Installation
INSTALLATION
1. Install reservoir and mounting bolts (2).
2. Connect wire connector to washer pump and harness mounting tab.
3. Connect washer fluid hose at in-line connector on top of the right shock tower.
4. If fascia was partially removed, reinstall bumper fascia as needed See: Body and Frame/Bumper/Front Bumper/Front Bumper Cover /
Fascia/Service and Repair/Front Bumper Fascia - Installation.
5. Fill washer fluid.
6. Connect the battery negative remote cable.
