Avenger V6-2.7L Flex Fuel (2009)
Wiper Motor Linkage: Service and Repair
Wiper Arm Linkage - Installation
INSTALLATION
1. Connect wire connector (2) at motor.
2. Place assembly into position, install the three mounting bolts (1), Tighten bolts to 11 Nm (97 in. lbs.).
3. Install the cowl screen See: Body and Frame/Cowl/Cowl Moulding / Trim/Service and Repair/Cowl Panel Cover - Installation.
4. Install the wiper arms and blades See: Wiper Arm/Service and Repair/Wiper Arm - Installation.
5. Connect the battery negative remote cable.
6. If necessary, adjust wiper arms See: Wiper Arm/Adjustments.
