Avenger V6-3.5L (2008)
Front Door Exterior Handle: Service and Repair
Front Door Exterior Handle - Installation
INSTALLATION
1. Insert tip of handle (1) towards front of door through handle opening in door outer.
2. Pull handle at rear as if to open to swing handle into opening.
3. Install fasteners (2) into sheet metal and into rear side of door handle. Tighten to 7 Nm (62 ft. lbs.).
4. Install door trim panel See: Front Door Panel/Service and Repair/Front Door Trim Panel - Installation.
5. Verify door handle operation. Adjust door latch as necessary See: Front Door Latch/Adjustments.