Avenger V6-35L (2008) Rear Cross-Member Removal
10. Remove the wheel speed sensor bracket bolt.
11. Disconnect the ground strap from the muffler.
12. Remove the extension pipe, muffler and tail pipe from the vehicle See: Engine, Cooling and Exhaust/Exhaust System/Service and Repair/Removal
and Replacement/Removal - Exhaust System.
13. Remove the stabilizer bar bolts from the rear suspension cross-member See: Steering and Suspension/Suspension/Stabilizer Bar/Service and
Repair/Rear Stabilizer Bar - Removal.
14. Remove the lower nut (3) from the rear suspension bracket from the body and rear suspension cross-member.
15. Position a transmission jack under the center of the rear suspension cross-member to support and lower it during removal. Remove the four bolts
attaching the rear suspension cross-member to rear frame rails.