Avenger V6-3.5L (2008)
3. Remove the two brake caliper guide pin bolts (2, 3).
4. Remove the disc brake caliper (4) from the disc brake adapter bracket (1) and hang it out of the way using wire or a bungee cord. Use care not to
overextend the brake hose when doing this.
5. Remove the brake pads (4, 5) from the caliper adapter bracket (2).
Rear
REMOVAL
NOTE: Before proceeding, See: Service Precautions/Brakes - Caution.
1. Raise and support the vehicle. See: Maintenance
NOTE: Perform STEP 2 through STEP 6 on each side of the vehicle to complete pad set removal.
2. Remove the wheel mounting nuts (3), then the tire and wheel assembly (1).
