Avenger V6-3.5L (2008)
5. Separate the ABM (1) from the HCU (2).
Assembly
ASSEMBLY
1. Clean any debris off the mating surfaces of the HCU and ABM.
CAUTION: When installing new O-rings or solenoid valve stem seals, do not use any type of lubricant.
2. If the seals (1) on the solenoid valve stems (2) are not new, replace them all. Each of the solenoid valve stem seals must be new to keep out
moisture and debris;do not reuse solenoid valve stem seals.
