Avenger V6-3.5L (2008)
CAUTION: Do not reuse the original stop lamp switch. The switch can only be adjusted once. That is during initial installation of the switch. If
the switch is not adjusted properly or has been removed for some service, a new switch must be installed and adjusted.
6. Install and adjust a NEW stop lamp switch (2) in the brake pedal bracket (1). See: Lighting and Horns/Brake Light Switch/Service and
Repair/Installation
7. Install the steering column opening cover (and airbag if equipped) on the instrument panel. See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair/Steering Column Opening Cover - Installation
CAUTION: When installing the vacuum hose on the check valve (1), make sure the hose is routed properly to avoid possible contact with
unfriendly surfaces.
8. Connect the vacuum hose (2) to the vacuum check valve (1).