Avenger V6-3.5L (2008)
6. Remove oil pan drain plug (1) from crankcase and allow oil to drain into pan. Inspect drain plug threads for stretching or other damage. Replace
drain plug and gasket if damaged.
7. Remove oil filter (2).
8. Install drain plug (1) in crankcase. Tighten oil pan drain plug to 27 Nm (20 ft. lbs.).
9. Install new oil filter (2).
10. Lower vehicle.
11. Fill crankcase with specified type and amount of engine oil.
12. Install oil fill cap (1).
13. Start engine and inspect for leaks.
14. Turn engine off and inspect oil level.
OIL FILTER SPECIFICATION
All engines are equipped with a high quality full-flow, disposable type oil filter. When replacing oil filter, use a Mopar(R) filter or equivalent.
USED ENGINE OIL DISPOSAL
Care should be exercised when disposing used engine oil after it has been drained from a vehicle engine. Refer to the WARNING above.
