Avenger V6-3.5L (2008)
Catalytic Converter: Removal and Replacement
Catalytic Converter - Removal
3.5L
WARNING: The normal operating temperature of the exhaust system is very high. Therefore, never work around or attempt to service any
part of the exhaust system until it is cooled. Special care should be taken when working near the catalytic converter. The temperature of the
converter rises to a high level after a short period of engine operation time.
1. Raise vehicle on hoist and apply penetrating oil to resonator/pipe assembly band clamp (4), and the fasteners that connect the catalytic converter to
the exhaust manifold.
2. Remove ground strap from muffler.
3. Loosen band clamp for resonator/pipe assembly (4).
CAUTION: Do not use any tools to remove the rubber isolators, remove by hand only. Soapy water or silicone based lubricant spray may
be used to assist removal/installation of isolators. DO NOT use a petroleum based lubricant on the isolators, as damage to the rubber
material can occur.
