Avenger V6-3.5L (2008)
4. Remove support isolators (1) from muffler/resonator assembly supports.
5. Remove muffler/resonator pipe (2) as an assembly.
6. Remove flange nuts (1) at cross-under pipe (4).
7. Remove catalytic converter from vehicle (1).
8. Remove and discard gasket (3).
Catalytic Converter - Installation
3.5L
NOTE: Always work from the front to rear of exhaust system when aligning and tightening exhaust system components.
1. Clean cross-under to catalytic converter sealing surfaces.
2. Position new gasket (3) on cross-under pipe (4).
3. Loosely attach catalytic converter to cross-under pipe (4).