Avenger V6-3.5L (2008)
15. Disconnect and isolate battery negative cable.
16. Reach in through the opening in the front of the fender and disconnect the turn signal lamp electrical connector (1).
17. Twist the bulb socket (3) counterclockwise and pull rearward to remove.
18. Pull bulb from bulb socket (3).
Installation
BULBS
HEADLAMP HIGH BEAMS
CAUTION: Do not touch the glass of halogen bulbs with fingers or other possibly oily surface. Reduced bulb life will result.
1. Position the headlamp bulb (1) in the front lamp unit.
2. Grasp the bulb and twist clockwise 1/4 turn.
3. Connect the headlamp bulb electrical connector.
4. Connect the battery negative cable.
HEADLAMP LOW BEAM DRIVER SIDE
