Avenger V6-3.5L (2008)
3. Lift the coolant recovery container as high as its connected hoses will allow, then install the clip (6) in the mounting hole (5) securing the supply
hose to the coolant recovery container's lower mounting point.
4. Lower the coolant recovery container (4) to its mounted position and install the mounting screws (1).
5. Place the fluid reservoir end of the supply hose (2) onto the reservoir (7) supply fitting. Expand the hose clamp and slide it over the hose and
fitting. Secure the clamp once it is past the bead formed into the fluid reservoir fitting.
6. Fill and bleed the power steering system. See: Steering and Suspension/Steering/Power Steering/Power Steering Bleeding/Service and Repair
7. Check for leaks.
