Avenger V6-3.5L (2008)
d.
Scroll down to "I/R Temp".
e.
Monitor the current temperature reading for the "I/R Temp".
5.
While monitoring "I/R Sensor On Time" or "I/R Temp" reading, place a finger over the face of the infrared sensor (located in the overhead
console or windshield header). The "I/R Sensor On Time" or "I/R Temp" reading should change rapidly as a finger is placed on and off of the
infrared sensor. A suspect I/R sensor will not change reading.
6.
Did the "I/R Sensor On Time" or "I/R Temp reading change?
a.
If YES >>>> then STOP. This bulletin does not apply. Further diagnosis is required.
b.
If NO >>>> then perform the Repair Procedure.
7.
Turn the ignition switch to the "OFF" position.
PARTS REQUIRED:
SPECIAL TOOLS/EQUIPMENT REQUIRED:
REPAIR PROCEDURE:
1.
Replace the infrared sensor. For detailed repair procedures refer to TechCONNECT. Select the SERVICE INFO tab, then: 24 - Heating and Air
Conditioning / 24 - HVAC - Service Information / Controls - Front / Sensor - Infrared / Removal and Installation.
2.
Verify that the infrared sensor face is centered to the hole in the overhead console.
3.
Verify that the "I/R Sensor On Time" reading changes when a finger is placed over the face of the sensor.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE: